What is being measured?
Electric current describes electric charge flow per time. The unit alone does not determine whether a circuit or installation is appropriate.
Prefixes are SI decimal powers. Convert within this quantity only.
Meaning of nA
Nanoamperes uses the symbol nA in this library and measures electric current. Under the stated reference convention, 1 nA = approximately 1e-9 A. This equivalence changes how a known value is written. It does not increase measurement accuracy or establish whether a measurement is appropriate to a real application.
Conversion method
Multiply the value by the source factor (0.000000001), then divide by the target factor (1). The factor ratio expresses the same electric current measurement in the other unit.
Worked example
For a known value of 10 nA, the reference conversion gives 1e-8 A. Converting that result back gives approximately 10 nA. This reverse check helps catch a reversed factor, but matching round-trip arithmetic alone does not independently verify a source definition.
Common reference values
| Input (nA) | Reference equivalent (A) |
|---|---|
| 1 | 1e-9 |
| 5 | 5e-9 |
| 10 | 1e-8 |
| 25 | 2.5e-8 |
| 50 | 5e-8 |
| 100 | 1e-7 |
Compare one nA with other units
| Target unit | Equivalent of 1 nA | Definition guide |
|---|---|---|
| Amperes (A) | 1e-9 | Read definition |
| Milliamperes (mA) | 0.000001 | Read definition |
| Microamperes (µA) | 0.001 | Read definition |
| Kiloamperes (kA) | 1e-12 | Read definition |
| Picoamperes (pA) | 1000 | Read definition |
| Femtoamperes (fA) | 1000000 | Read definition |
Precision and common mistakes
- Keep the source and target quantity consistent. A matching symbol is not enough to establish a compatible definition.
- Record the original measurement precision. Showing twelve significant digits in a table does not make a rounded input more precise.
- Check symbol capitalization, prefixes and any regional convention in the source. Use the displayed unit definition rather than a similarly named unit.
- Factors involving repeating fractions or π use finite numerical precision. Round the final answer to the precision justified by your input.
Use a working converter
- Electric current converter
- Nanoamperes to Amperes converter
- Nanoamperes to Milliamperes converter
- Nanoamperes to Microamperes converter
- Nanoamperes to Kiloamperes converter
- Nanoamperes to Picoamperes converter
Source and verification scope
Examples and tables are computed from the versioned unit definitions used by the linked converters. The source access dates appear below. Computandum is independent of the cited organizations; a citation does not mean that a publisher endorses this page or an actual project.