MEASUREMENT & METHODS

Pounds per hour (lb/h): mass flow unit guide

Understand pounds per hour (lb/h) for mass flow. Check base-unit equivalents, examples, comparison tables and source conventions.

What is being measured?

Mass flow is mass per time. Converting it into volumetric flow requires a density at the relevant conditions.

Mass flow cannot convert to volumetric flow without density. Pounds are avoirdupois.

Meaning of lb/h

Pounds per hour uses the symbol lb/h in this library and measures mass flow rate. Under the stated reference convention, 1 lb/h = approximately 0.000125997880556 kg/s. This equivalence changes how a known value is written. It does not increase measurement accuracy or establish whether a measurement is appropriate to a real application.

Conversion method

Multiply the value by the source factor (0.00012599788055555555555555555555555555555555555555556), then divide by the target factor (1). The factor ratio expresses the same mass flow rate measurement in the other unit.

Worked example

For a known value of 10 lb/h, the reference conversion gives 0.00125997880556 kg/s. Converting that result back gives approximately 10 lb/h. This reverse check helps catch a reversed factor, but matching round-trip arithmetic alone does not independently verify a source definition.

Common reference values

Input (lb/h)Reference equivalent (kg/s)
10.000125997880556
50.000629989402778
100.00125997880556
250.00314994701389
500.00629989402778
1000.0125997880556

Compare one lb/h with other units

Target unitEquivalent of 1 lb/hDefinition guide
Kilograms per second (kg/s)0.000125997880556Read definition
Kilograms per hour (kg/h)0.45359237Read definition
Grams per second (g/s)0.125997880556Read definition
Grams per minute (g/min)7.55987283333Read definition
Pounds per second (lb/s)0.000277777777778Read definition

Precision and common mistakes

  • Keep the source and target quantity consistent. A matching symbol is not enough to establish a compatible definition.
  • Record the original measurement precision. Showing twelve significant digits in a table does not make a rounded input more precise.
  • Check symbol capitalization, prefixes and any regional convention in the source. Use the displayed unit definition rather than a similarly named unit.
  • Factors involving repeating fractions or π use finite numerical precision. Round the final answer to the precision justified by your input.

Use a working converter

Source and verification scope

Examples and tables are computed from the versioned unit definitions used by the linked converters. The source access dates appear below. Computandum is independent of the cited organizations; a citation does not mean that a publisher endorses this page or an actual project.

Sources

Read the calculation and sourcing methodology →