What is being measured?
Voltage is an electric potential difference. A voltage conversion does not calculate power, insulation requirements or installation conditions.
Prefixes are SI decimal powers. Convert within this quantity only.
Meaning of MV
Megavolts uses the symbol MV in this library and measures voltage. Under the stated reference convention, 1 MV = approximately 1000000 V. This equivalence changes how a known value is written. It does not increase measurement accuracy or establish whether a measurement is appropriate to a real application.
Conversion method
Multiply the value by the source factor (1000000), then divide by the target factor (1). The factor ratio expresses the same voltage measurement in the other unit.
Worked example
For a known value of 10 MV, the reference conversion gives 10000000 V. Converting that result back gives approximately 10 MV. This reverse check helps catch a reversed factor, but matching round-trip arithmetic alone does not independently verify a source definition.
Common reference values
| Input (MV) | Reference equivalent (V) |
|---|---|
| 1 | 1000000 |
| 5 | 5000000 |
| 10 | 10000000 |
| 25 | 25000000 |
| 50 | 50000000 |
| 100 | 100000000 |
Compare one MV with other units
| Target unit | Equivalent of 1 MV | Definition guide |
|---|---|---|
| Volts (V) | 1000000 | Read definition |
| Millivolts (mV) | 1000000000 | Read definition |
| Microvolts (µV) | 1000000000000 | Read definition |
| Kilovolts (kV) | 1000 | Read definition |
| Nanovolts (nV) | 1000000000000000 | Read definition |
| Picovolts (pV) | 1000000000000000000 | Read definition |
Precision and common mistakes
- Keep the source and target quantity consistent. A matching symbol is not enough to establish a compatible definition.
- Record the original measurement precision. Showing twelve significant digits in a table does not make a rounded input more precise.
- Check symbol capitalization, prefixes and any regional convention in the source. Use the displayed unit definition rather than a similarly named unit.
- Factors involving repeating fractions or π use finite numerical precision. Round the final answer to the precision justified by your input.
Use a working converter
- Voltage converter
- Megavolts to Volts converter
- Megavolts to Millivolts converter
- Megavolts to Microvolts converter
- Megavolts to Kilovolts converter
- Megavolts to Nanovolts converter
Source and verification scope
Examples and tables are computed from the versioned unit definitions used by the linked converters. The source access dates appear below. Computandum is independent of the cited organizations; a citation does not mean that a publisher endorses this page or an actual project.
Sources
- NIST / BIPM: Voltage: reference unit definitions ↗ · 2026-10-08