What is being measured?
Force is distinct from mass. A force conversion does not determine an allowable load, structural capacity or a material property.
Gravity-derived factors use standard gravity 9.80665 m/s². Ton-force means US short ton-force.
Meaning of pdl
poundals uses the symbol pdl in this library and measures force. Under the stated reference convention, 1 pdl = approximately 0.138254954376 N. This equivalence changes how a known value is written. It does not increase measurement accuracy or establish whether a measurement is appropriate to a real application.
Conversion method
Multiply the value by the source factor (0.138254954376), then divide by the target factor (1). The factor ratio expresses the same force measurement in the other unit.
Worked example
For a known value of 10 pdl, the reference conversion gives 1.38254954376 N. Converting that result back gives approximately 10 pdl. This reverse check helps catch a reversed factor, but matching round-trip arithmetic alone does not independently verify a source definition.
Common reference values
| Input (pdl) | Reference equivalent (N) |
|---|---|
| 1 | 0.138254954376 |
| 5 | 0.69127477188 |
| 10 | 1.38254954376 |
| 25 | 3.4563738594 |
| 50 | 6.9127477188 |
| 100 | 13.8254954376 |
Compare one pdl with other units
| Target unit | Equivalent of 1 pdl | Definition guide |
|---|---|---|
| newtons (N) | 0.138254954376 | Read definition |
| kilonewtons (kN) | 0.000138254954376 | Read definition |
| dynes (dyn) | 13825.4954376 | Read definition |
| kilogram force (kgf) | 0.0140980818502 | Read definition |
| pound force (lbf) | 0.0310809501716 | Read definition |
| kips (kip) | 0.0000310809501716 | Read definition |
| US short ton-force (US tonf) | 0.0000155404750858 | Read definition |
| Millinewtons (mN) | 138.254954376 | Read definition |
Precision and common mistakes
- Keep the source and target quantity consistent. A matching symbol is not enough to establish a compatible definition.
- Record the original measurement precision. Showing twelve significant digits in a table does not make a rounded input more precise.
- Check symbol capitalization, prefixes and any regional convention in the source. Use the displayed unit definition rather than a similarly named unit.
- Factors involving repeating fractions or π use finite numerical precision. Round the final answer to the precision justified by your input.
Use a working converter
- Force converter
- Poundals to newtons converter
- Poundals to kilonewtons converter
- Poundals to pound force converter
- Poundals to kilogram force converter
- Poundals to dynes converter
Source and verification scope
Examples and tables are computed from the versioned unit definitions used by the linked converters. The source access dates appear below. Computandum is independent of the cited organizations; a citation does not mean that a publisher endorses this page or an actual project.
Sources
- NIST / BIPM: NIST: unit conversion factors ↗ · 2026-10-08